Mini trainer speed sensor: Validation of learning media

Daniel Parningotan Debataraja; Irma Yulia Basri; Rifdarmon Rifdarmon; Iffarial Nanda

doi:10.62590/regy.v3i1.125

Authors

Daniel Parningotan Debataraja Universitas Negeri Padang
Irma Yulia Basri Universitas Negeri Padang https://orcid.org/0009-0003-7420-521X
Rifdarmon Rifdarmon Universitas Negeri Padang https://orcid.org/0000-0002-1652-0321
Iffarial Nanda Universitas Negeri Padang

DOI:

https://doi.org/10.62590/regy.v3i1.125

Keywords:

speed sensor mini trainer, learning media, vocational education

Abstract

The problem of this research was the limitation of learning media for speed sensors in the Ototronics laboratory, which has an impact on three critical aspects in the teaching and learning process: (1) limited students gain practical experience, (2) decreased student motivation and participation, and (3) the difficulty of lecturers demonstrating material comprehensively in the Sensors and Transducers course. This research aimed to design a mini trainer speed sensor as an innovative learning media to overcome the limitations of practicum media in the Ototronics laboratory, impacting the student learning experience. The research used a quantitative-descriptive and Structural Equation Modeling-Partial Least Squares (SEM-PLS) validation involving 7 learning media experts. The results showed highly significant design validity. The didactic aspect proved to give the most superior contribution to improving the effectiveness of learning media. This research successfully addressed three main problems: student’s limited practical experience, decreased participation motivation, and lecturers’ difficulty demonstrating the material. The results confirm that this particular learning media effectively addresses three critical impacts in the teaching and learning process: student’s limited practical experience, decreased participation motivation, and lecturers’ difficulty demonstrating the material, thus opening up opportunities for developing transformative interactive learning media in technical vocational education.

References

Almen, A., & Dewi, M. (2024). Development of a basic technical learning model for long jump squat style based on traditional games for students. Research in Education and Technology (REGY), 2(2), 80-86. https://doi.org/10.62590/regy.v2i2.117.

Ananda, I., & Rakhmawati, A. (2022). Pembelajaran sastra populer sebagai peningkatan literasi digital dengan penggunaan media aplikasi Wattpad: Studi Kasus. Research in Education and Technology (REGY), 1(1), 36-45. https://doi.org/10.62590/regy.v1i1.6.

Arpan, M., Ambiyar, A., & Rizal, F. (2022). Konsep Project and peer tutoring-based learning pada pembelajaran abad 21. Sukoharjo: Tahta Media.

Arpan, M., Ambiyar, A., Ridwan, Nasution, A., & Rifdarmon, R. (2024). Augmented reality solutions by utilizing mobile technology for enhanced skill development. International Journal of Interactive Mobile Technologies (iJIM), 18(20), 129-141. https://doi.org/10.3991/ijim.v18i20.50809.

Arpan, M., Salaman, S., Budiman, R. D. A., Ambyar, A., & Wakhinuddin, W. (2020). Student learning outcomes using drill and practice type of computer assisted instruction. International Journal of Scientific & Technology Research, 9(04), 1433-1436.

Arsyad, A. (2014). Media pembelajaran. Jakarta: Rajawali Pers.

Basri, I. Y., Nasrianto, A., & Andrizal, A. (2022). Rancang bangun mini trainer potensiometrik sensor sebagai media pembelajaran. JTEV (Jurnal Teknik Elektro dan Vokasional), 8(1), 85-95. https://doi.org/10.24036/jtev.v8i1.114269.

Batubara, I. H. (2020). Pengaruh model pembelajaran guided discovery learning terhadap hasil belajar pengembangan silabus pembelajaran matematika pada masa pandemic Covid 19. Jurnal Penelitian, Pendidikan dan Pengajaran: JPPP, 1(2), 13-17. https://doi.org/10.30596/jppp.v1i2.4948.

Batubara, Q. N. M. (2023). ICT-based needs analysis of learning arts and culture in middle school at Sunggal. Research in Education and Technology (REGY), 2(1), 38-41. https://doi.org/10.62590/regy.v2i1.96.

Billet, S. (2011). Vocational education: Purposes, traditions and prospects. Dordrecht: Springer Dordrecht.

Budiman, R. D. A., Arpan, M., & Verawardina, U. (2018). Readiness assessment penerapan media pembelajaran pengenalan hardware jaringan komputer berbasis augmented reality. Jurnal Pendidikan Informatika dan Sains, 7(1), 118-125.

Budiman, R. D. A., Liwayanti, U., & Arpan, M. (2022). Analisis kebutuhan dan kesiapan penerapan media pembelajaran berbasis Android Materi Ilmu Akidah. EDUMATIC: Jurnal Pendidikan Informatika, 6(1), 31-38. https://doi.org/10.29408/edumatic.v6i1.5087.

Emiliya, E., Erikson, S., Arianto, D. P., Florida, R., & Almahdi, A. (2023). Application of jigsaw type cooperative learning to student learning outcomes in class IX SMP Negeri 2 Ngabang. Research in Education and Technology (REGY), 2(1), 16-20. https://doi.org/10.62590/regy.v2i1.98.

Feladi, V., Arpan, M., & Verawardina, U. (2017). Pelatihan pembuatan media pembelajaran berbasis animasi di SMP Negeri 2 Siantan Kabupaten Mempawah. Gervasi: Jurnal Pengabdian kepada Masyarakat, 1(1), 32-42.

Kriswandono, D. A., & Suprianto, B. (2014). Pengembangan media pembelajaran trainer sensor warna berbasis Arduino Uno dalam bentuk aplikasi alat pembaca 8 jenis warna pada mata kuliah Bengkel Elektronika di Universitas Negeri Surabaya. Jurnal Pendidikan Teknik Elektro, 3(2), 163-168.

Lesmana, C., Arpan, M., Ambiyar, A., Wakhinuddin, W., & Fatmawati, E. (2019). Respons mahasiswa terhadap pelaksanaan program matrikulasi. Edukasi: Jurnal Pendidikan, 17(2), 227-237. http://dx.doi.org/10.31571/edukasi.v17i2.1528.

Nasution, A., Ambiyar, Refdinal, Arpan, M., & Putri, E. (2024). POGIL learning model—metaphorming for mobile-based cryptography creation. International Journal of Interactive Mobile Technologies (iJIM), 18(11), 146-159. https://doi.org/10.3991/ijim.v18i11.49057.

Nurrita, T. (2018). Pengembangan media pembelajaran untuk meningkatkan hasil belajar siswa. Misykat: Jurnal-ilmu-ilmu Al-Quran, Hadits, Syariah dan Tarbiyah, 3(1), 171-187. https://doi.org/10.33511/misykat.v3n1.171.

Putra, A. N., & Yundra, E. (2019). Pengembangan trainer weather station dengan sistem wireless sensor network sebagai media pembelajaran pada mata pelajaran Mikroprosesor dan Mikrokontroler di SMK Negeri 1 Blitar. Jurnal Pendidikan Teknik Elektro, 8(1), 75-80.

Rifdarmon, R., Ganefri, G., Lapisa, R., Giatman, M., Jalinus, N., & Maksum, H. (2024). Integration of mobile learning in Rifdarmon model to improve student learning outcomes. International Journal of Interactive Mobile Technologies (iJIM), 18(23), 98-109. https://doi.org/10.3991/ijim.v18i23.51217.

Rifdarmon, R., Sa’diah, H., & Syaifullah, L. (2023). Perancangan bodi kendaraan prototype arrow concept sebagai media pembelajaran mata kuliah Konstruksi Badan Kendaraan. Edukasi: Jurnal Pendidikan, 21(1), 172-186. https://doi.org/10.31571/edukasi.v21i1.5679.

Ronald, J., Amelia, M., & Erita, E., Verawati, R. (2017). Pengaruh metode pembelajaran sosiodrama terhadap hasil belajar materi Hukum Dagang pada mahasiswa 2014 Sesi F Pendidikan Ekonomi STKIP PGRI Sumbar. Economica: Journal of Economic and Economic Education, 5(2), 106-113.

Setiawan, D., Rifdarmon, R., Yuvenda, D., & Nasir, M. (2022). Pengaruh metode diskusi menggunakan aplikasi Zoom terhadap hasil belajar mahasiswa. Edumaspul: Jurnal Pendidikan, 6(1), 592-598. https://doi.org/10.33487/edumaspul.v6i1.1870.

Sii, P., Verawardina, U., Arpan, M., & Sulistiyarini, D. (2017). Penerapan model pembelajaran inkuiri pada mata pelajaran KKPI terhadap kemampuan psikomotorik siswa. Jurnal Pendidikan Informatika dan Sains, 6(2), 166-176.

Sitompul, H., Setiawan, D., & Purba, E. (2017). Pengaruh media pembelajaran dan motivasi belajar terhadap hasil belajar desain sistem instruksional pendekatan TPACK. Jurnal Teknologi Informasi & Komunikasi dalam Pendidikan, 4(2), 141-146. https://doi.org/10.24114/jtikp.v4i2.8761.

Sukardi, S., & Rozi, F. (2019). Pengaruh model pembelajaran online dilengkapi dengan tutorial terhadap hasil belajar. JIPI (Jurnal Ilmiah Penelitian dan Pembelajaran Informatika), 4(2), 97-102. https://doi.org/10.29100/jipi.v4i2.1066.

Sulistiyarini, D., Bibi, S., Fatmawati, E., & Arpan, M. (2018). Pelatihan pembuatan media pembelajaran interaktif di SMP dan SMK Mandiri Pontianak. Gervasi: Jurnal Pengabdian kepada Masyarakat, 2(1), 39-46.

Sumadji, S. (2015). Pengaruh metode pembelajaran terhadap hasil belajar mahasiswa. Jurnal Inspirasi Pendidikan, 5(2), 653-662. https://doi.org/10.21067/jip.v5i2.799.

Supardi, S., Putra, R. K., Iqbal, M., & Toni, K. (2023). Development of mobile AR applications as a science learning media in increasing junior high school students’ interest in learning. Research in Education and Technology (REGY), 2(1), 1-5. https://doi.org/10.62590/regy.v2i1.93.

Surapranata, S. (2004). Analisis, validitas, reliabilitas dan interpretasi hasil test: Implementasi Kurikulum 2004. Bandung: PT Remaja Rosdakarya.

Syaifullah, L., Ambiyar, A., Zaus, M. A., & Arpan, M. (2024). Efektivitas pendekatan blended learning berbantuan e-learning terhadap hasil belajar mahasiswa. Juwara Jurnal Wawasan dan Aksara, 4(1), 1-12. https://doi.org/10.58740/juwara.v4i1.73.

Yandi, R. P., & Basri, I. Y. (2021). Rancang Bangun mini trainer temperatur sensor berbasis Arduino sebagai media pembelajaran. JTEV (Jurnal Teknik Elektro dan Vokasional), 7(1), 18-26. https://doi.org/10.24036/jtev.v7i1.110119.